Loading failed due to mismatch between the height of the grader and the height of the trailer. It could have caused much more serious problems, fortunately, the problem was solved without any problems. A few other important factors that cause the grayder to fail while being loaded onto the trailer can be listed as follows.
Sloping Ground: If the loading process is carried out on a sloping ground, this may make it difficult to load properly.
Insufficient Capacity: If the grayder’s payload capacity is not sufficient to support the weight of the trailer, loading failure may be inevitable.
Operator Error: An operator who does not use proper techniques or is careless can cause the installation to fail.
Comments are closed.